No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snapshot deactivate

change snapshot deactivate

Function

The change snapshot deactivate command is used to deactivate snapshots.

Format

change snapshot deactivate { snapshot_id=? | snapshot_id_list=? }

Parameters

Parameter

Description

Value

snapshot_id=?

ID of a snapshot.

To obtain the value, run "show snapshot general".

snapshot_id_list=?

Snapshot ID list.

To obtain the value, run "show snapshot general".

You can specify multiple snapshot IDs separated by commas (,), or range separated by hyphens(-), such as: 0,5-8.

Level

Administrator

Usage Guidelines

  • Only the snapshots in the state of activated can be deactivated.
  • Running this command erases the data of the selected snapshot.
  • Before running this command, ensure that the selected snapshot is exactly the one you want to deactivate.

Example

  • To deactivate snapshot "10", run the following command.
    admin:/>change snapshot deactivate snapshot_id=10 
    DANGER: You are about to deactivate snapshot. This operation will delete the snapshot data. When a timing snapshot is used, it is converted to a common snapshot. 
    Suggestion: Before performing this operation, ensure that the selected snapshot is correct and considered to have no useful data. 
    Have you read danger alert message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • To deactivate snapshots "11", "12", and "13", run the following command.
    admin:/>change snapshot deactivate snapshot_id_list=11,12,13 
    DANGER: You are about to deactivate snapshot. This operation will delete the snapshot data. When a timing snapshot is used, it is converted to a common snapshot. 
    Suggestion: Before performing this operation, ensure that the selected snapshot is correct and considered to have no useful data. 
    Have you read danger alert message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Deactivate snapshot 11 from activated snapshots successfully. 
    Deactivate snapshot 12 from activated snapshots successfully. 
    Deactivate snapshot 13 from activated snapshots successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 114091

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next