No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show lun_consistency_group general

show lun_consistency_group general

Function

The show lun_consistency_group general command is used to query information about LUN consistency groups in the storage system.

Format

show lun_consistency_group general [ lun_consistency_group_id=? | lun_consistency_group_name=? ]

Parameters

Parameter

Description

Value

lun_consistency_group_id=?

ID of the LUN consistency group to be queried.

To obtain the value, run the "show lun_consistency_group general" command without parameters.

lun_consistency_group_name=?

Name of the LUN consistency group to be queried.

To obtain the value, run the "show lun_consistency_group general" command without parameters.

Level

Guest

Usage Guidelines

  • Run the "show lun_consistency_group general" command to query information about all LUN consistency groups in the storage system.
  • Run the "show lun_consistency_group general lun_consistency_group_id=?" command to query information about a specified LUN consistency group.

Example

  • Query information about all LUN consistency groups in the storage system.
    admin:/>show lun_consistency_group general 
      ID  Name  Running Status  ScheduleId 
      --  ----  --------------  ---------- 
      1 cg1 Normal          --
  • Query information about LUN consistency group "1".
    admin:/>show lun_consistency_group general lun_consistency_group_id=1 
    ID              : 1 
    Name            : cg1 
    Running Status  : Normal 
    ScheduleId      : -- 
    Description  :  
    Disable Schedule Policy : None

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

ID of a LUN consistency group.

Name

Name of a LUN consistency group.

Running Status

Indicates the running status.

ScheduleId

ID of a HyperCDP schedule for the LUN consistency group.

Description

Description.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100049140

Views: 103289

Downloads: 119

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next