No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show enclosure

show enclosure

Function

The show enclosure command is used to query details on the engine and disk enclosure.

Format

show enclosure [ enclosure_id=? ]

Parameters

Parameter

Description

Value

enclosure_id=?

ID of an engine or disk enclosure.

To obtain the value, run "show enclosure" without parameters.

Level

Guest

Usage Guidelines

  • To query details on all engines and disk enclosures, run show enclosure.
  • To query details on a specific engine or disk enclosure, run show enclosure enclosure_id=?.

Example

  • Query details on all engines and disk enclosures. The command output varies depending on a specific product.
    admin:/>show enclosure 
      ID      Logic Type           Health Status  Running Status  Type                                Temperature(Celsius) 
      ------  -------------------  -------------  --------------  ----------------------------------  -------------------- 
      CTE0 Engine               Normal         Online        3U 2 Controllers Enclosure          28                     
      DAE000  Expansion Enclosure  Normal         Online          2U 25 Slot 2.5 SAS Disks Enclosure  26  
  • Query details on the engine whose ID is "CTE0". The command output varies depending on a specific product.
    admin:/>show enclosure enclosure_id=CTE0 
      
    ID : CTE0 
    Logic Type : Engine 
    Health Status : Normal 
    Running Status : Online 
    Location : SMB0.20U 
    Type : BMC Controller Enclosure 
    Temperature(Celsius) : 50 
    SN : -- 
    MAC : -- 
    Height(U) : 4 
    Expansion Depth : 0 
    Electronic Label     : [Board Properties] 
                             BoardType=STLZ02ENGA 
                             BarCode=210235980510F3000007 
                             Item=02359805 
                             Description=OceanStor 5600 V3,STLZ02ENGA,5600 V3(3U,Dual Ctrl,AC,128GB,SPE62C0300) 
                             Manufactured=2015-03-18 
                             VendorName=Huawei 
                             IssueNumber=00 
                             CLEICode= 
                             BOM=

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Enclosure ID.

Logic Type

Logical type of the enclosure.

Health Status

Health status of the enclosure.

Running Status

Running status of the enclosure.

Location

Position of the enclosure.

Type

Enclosure type.

Temperature(Celsius)

Enclosure temperature (°C).

SN

Enclosure SN.

MAC

MAC address of the enclosure.

Height(U)

Enclosure height.

Expansion Depth

Expansion depth of the enclosure.

Electronic Label

Electronic label of the enclosure.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123984

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next