No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show lun_clone general

show lun_clone general


The show lun_clone general command is used to query clone information.


show lun_clone general { [ clone_id=? ] | [ clone_name=? ] | [ source_id=? ] | [ source_name=? ] | [ source_type=? ] }






Clone ID. The user can use this parameters to set an ID for the new clone. If the ID is specified, it cannot be changed. If you do not set this parameter, the storage system automatically allocates an ID for the clone based on IDs of created clones.

To obtain the value, run "show lun_clone general" without parameters.


Name of a clone.

The value contains 1 to 31 characters including letters, digits, hyphens (-), underscores (_), and periods (.).


ID of a source LUN or a source snapshot.

  • To obtain the value, run "show lun_clone available_lun".
  • To obtain the value, run "show lun_clone available_snapshot".


Name of a source LUN or a source snapshot.

  • To obtain the value, run "show lun_clone available_lun".
  • To obtain the value, run "show lun_clone available_snapshot".


LUN or snapshot.

The value is either LUN or snapshot.



Usage Guidelines

  • Run "show lun_clone general" to query information about all clones.
  • Run "show lun_clone general clone_id=?" to query information a clone whose ID is specified.
  • Run "show lun_clone general clone_name=?" to query information about a clone whose name is specified.
  • Run "show lun_clone general source_id=?" to query information about specified clone source LUN.


  • Query detailed information about lun_clone "1".
    admin:/>show lun_clone general clone_id=1 
      ID                  : 1                             
      Name                : clone_lun1                    
      Pool ID             : 0                             
      Capacity            : 100.000GB                     
      Subscribed Capacity : 0.000B                        
      Source ID           : 0                             
      Source Name         : lun_1                         
      Source Type         : Lun                           
      Health Status       : Normal                        
      Running Status      : Online                        
      Time Stamp          : 2017-11-09/09:40:32 UTC+08:00  
      Split Status        : Not split                     
      Split Start Time : --                            
      Estimated Split End Time      : --                            
      Split Speed         : Middle                        
      Split Progress(%) : --                            
      SmartQoS Policy ID  : --                            
      IO Priority         : Low  
  • Query information about all clones.
    admin:/>show lun_clone general 
      ID  Name        Source ID  Source Name  Source Type  Health Status  Running Status  Time Stamp                     Split Status  Split Start Time  Estimated Split End Time  Split Speed 
      --  ----------  ---------  -----------  -----------  -------------  --------------  -----------------------------  ------------  ----------------  --------------  ----------- 
      1 clone_lun1  0          lun_1        Lun          Normal         Online          2017-11-09/09:40:32 UTC+08:00  Not split     --                --              Middle  

System Response

The following table describes the parameter meanings.




ID of clone.


Name of clone.

Source ID

Source object ID of clone, including the LUN and snapshot.

Source Name

Source object name of clone, including the LUN and snapshot.

Source Type

Source object type.

Pool ID

Storage pool ID.

Running Status

Running status of clone.

Health Status

Health status of clone.



Subscribed Capacity

The actual used capacity.

Time Stamp

Creation time of the clone.

Split Status

Split status.

Split Speed

Split speed.

Split Progress(%)

Split progress (%).

Split Start Time

Split start time of clone.

Estimated Split End Time

Estimated split end time of clone.

SmartQoS Policy ID

SmartQoS ID.

IO Priority

I/O priority of clone.

Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122688

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next