No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove consistency_group remote_replication

remove consistency_group remote_replication

Function

The remove consistency_group remote_replication command is used to delete remote replication pairs from a consistency group.

Format

remove consistency_group remote_replication consistency_group_id=? remote_replication_id=?

Parameters

Parameter

Description

Value

consistency_group_id=?

ID of a consistency group.

To obtain the value, run "show consistency_group general".

remote_replication_id=?

ID of the remote replication pair that you want to delete.

To obtain the value, run "show remote_replication general".

Level

Administrator

Usage Guidelines

  • Running this command destroys the status consistency between the selected remote replication pair and the consistency group.
  • Before running this command, ensure that the selected remote replication pair is exactly the one you want to delete.
  • You can run this command only on the primary end of a consistency group.

Example

Delete remote replication pair whose ID is "9747215445131235" from consistency group "9747215445131264".

admin:/>remove consistency_group remote_replication consistency_group_id=9747215445131264 remote_replication_id=9747215445131235 
DANGER: You are about to remove remote replication task from consistency group. After this operation, the status of the remote replication task becomes inconsistent with that of the consistency group. 
Suggestion: Before performing this operation, ensure that the selected remote replication task is correct. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 114114

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next