No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show server_ip

show server_ip

Function

The show server_ip command is used to query local listening IP addresses and port IDs that have been added to a quorum server and established TCP links.

Format

show server_ip

Parameters

None

Level

Administrator

Usage Guidelines

This command must be executed on a quorum server.

Example

Query local listening IP addresses and port IDs that have been added to a quorum server and established TCP links.

admin:/>show server_ip 
Index     Server IP                                    Server Port 
 -----     ---------------                              --------------- 
 1         192.168.0.1                                  30002 
Index     Local IP            Local Port          Remote IP           Remote Port         State                
 -----   ---------------     ---------------     ---------------     ---------------     ----------           
 0         192.168.0.1         30002               192.168.0.2         48030               Established

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Index of the quorum server's IP address.

Server IP

Local listening IP address that has been added.

Server Port

Local listening port ID that has been added.

Local IP

Local IP address on which TCP links have been established.

Local Port

Local port on which TCP links have been established.

Remote IP

Remote IP address on which TCP links have been established.

Remote Port

Remote port on which TCP links have been established.

State

TCP link state.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122533

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next