No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show notification trap

show notification trap

Function

The show notification trap command is used to query the settings of the trap server.

Format

show notification trap [ server_id=? ]

Parameters

Parameter

Description

Value

server_id=?

ID of the trap server.

To obtain the value, run "show notification trap" without parameters. The value can be an integer between 0 and 3.

Level

Guest

Usage Guidelines

  • To query the settings of all trap servers, run "show notification trap".
  • To query the settings of a specific trap server, run "show notification trap [ server_id=? ]".

Example

  • To query the settings of all trap servers.
    admin:/>show notification trap 
    Server ID Server IP Server Port Trap Version Trap Type USM User Name  
    --------- ------------ ----------- ------------ --------- ------------- 
    0     192.168.10.7 168     v3      Original  Kaimse  
    1     192.168.9.65 162     v1      All     -- 
    2     192.168.9.04 162     v2c     Parsed -- 
    3     192.168.19.5 162     v3   All     user
  • To query the settings of the trap server whose ID is "0".
    admin:/>show notification trap server_id=0 
    Server ID Server IP Server Port Trap Version Trap Type USM User Name  
    --------- ------------ ----------- ------------ --------- ------------- 
    0     192.168.10.7 168     v3      Original  Kaimse

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Server ID

ID of the trap server.

Server IP

Trap server address. The value can be an IP address or domain name. If the value is a domain name, all the IP addresses corresponding to the domain name must point to one server.

Server Port

Port ID of the trap server.

Trap Version

Version of the trap server.

Trap Type

Type of the trap server.

USM User Name

USM user name of the trap server.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121785

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next