No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change consistency_group split

change consistency_group split

Function

The change consistency_group split command is used to split consistency groups.

Format

change consistency_group split consistency_group_id=?

Parameters

Parameter

Description

Value

consistency_group_id=?

ID of a consistency group.

To obtain the value, run "show consistency_group general".

Level

Administrator

Usage Guidelines

  • Running this command destroys the data consistency between the primary logical unit number (LUN) and a secondary LUN.
  • Before running this command, ensure that the selected consistency group is exactly the one you want to split.
  • You can run this command only on the primary end for a consistency group.
  • You cannot split a consistency group if its replication relationship is split or replication failed.

Example

Split consistency group "9747215445131264".

admin:/>change consistency_group split consistency_group_id=9747215445131264 
WARNING: You are about to split the primary and secondary resources in all remote replication tasks within consistency group.After this operation,the data on the primary and secondary resources is not synchronized any longer. 
Suggestion: Before performing this operation, ensure that the selected consistency group is correct. 
Have you read warning message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully. 

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 113953

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next