No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show storage_pool general

show storage_pool general


The show storage_pool general command is used to query information about storage pools.


show storage_pool general [ pool_id=? ]






ID of a storage pool.

To obtain the value, run "show storage_pool general" without parameters.



Usage Guidelines

  • Run "show storage_pool general" to query basic information about all storage pools.
  • Run "show storage_pool general pool_id=?" to query detailed information about a specified storage pool.


  • Query basic information about all storage pools.
    admin:/>show storage_pool general 
    ID  Name      Disk Domain ID  Health Status  Running Status  Total Capacity  Free Capacity  Usage Type 
    --  --------  --------------  -------------  --------------  --------------  -------------  ---------- 
    0 poolTest  0               Normal         Online                 8.000GB        8.000GB  LUN
  • Query detailed information about storage pool "0".
    admin:/>show storage_pool general pool_id=0 
      ID                                 : 0          
      Name                               : poolTest 
      Disk Domain ID                     : 0          
      Health Status                      : Normal     
      Running Status                     : Online     
      Total Capacity                     : 8.000GB 
      Subscribed Capacity                : 0.000B     
      Free Capacity                      : 8.000GB 
      Protection Capacity                : 0.000B     
      Tier0 Capacity                     : -- 
      Tier1 Capacity                     : --      
      Tier2 Capacity                     : --         
      Full Threshold(%)                  : 80         
      Used Up Threshold(%)               : 90         
      Raid Level                         : RAID6       
      LUN Total Capacity                 : 0.000B     
      LUN Subscribed Capacity            : 0.000B     
      Deduplication Ratio                : 1.0:1      
      Compression Ratio                  : 1.0:1      
      Data Reduction Ratio               : 1.0:1      
      Thin Provision Saving(%)           : 0.0  
      Overall Efficiency                 : 1.0:1      
      Usage Type                         : LUN  
      Extent Size                        : --         
      SmartTier Feature Status           : --         
      Relocation Status                  : --         
      Relocation Trigger Mode            : --         
      Relocation Paused                  : --         
      Estimated Move-up Data             : --         
      Estimated Move-down Data           : --         
      Estimated Data Relocation Duration : --         
      Full Protect Threshold(%)          : --         
      File System Total Capacity         : -- 
      Block Size                         : 8KB 
      Used Capacity Percent(%): 0 
      Provisioning Limit Switch          : on 
      Provisioning Limit                 : 100 
      Protection Low Threshold(%)        : 20 
      Protection High Threshold(%)       : 30 
      Allocated Protection Capacity      : 0.000B  
      Automatic Deletion Switch          : off

System Response

The following table describes the parameter meanings.




Storage pool ID.


Name of the storage pool.

Disk Domain ID

Disk domain ID.

Health Status

Health status.

Running Status

Running status.

Total Capacity

Total capacity of the storage pool.

Subscribed Capacity

Capacity allocated to the LUNs.

Free Capacity

Free capacity of the storage pool.

Protection Capacity

Data protection capacity quota.

Tier0 Capacity

Capacity of tier 0.

Tier1 Capacity

Capacity of tier 1.

Tier2 Capacity

Capacity of tier 2.

Full Threshold(%)

Capacity alarm threshold.

Used Up Threshold(%)

Capacity exhaustion threshold.

Raid Level

RAID level.

LUN Total Capacity

Total capacity of LUNs that are configured in the storage pool.

LUN Subscribed Capacity

Total capacity of LUNs that are used in the storage pool.

Deduplication Ratio

Deduplication ratio.

Compression Ratio

Compression ratio.

Data Reduction Ratio

Data reduction ratio.

Thin Provision Saving(%)

Space saving ratio of thin LUNs.

Overall Efficiency

Overall space saving ratio.

Usage Type

Storage pool use.

Extent Size

Data relocation granularity.

SmartTier Feature Status

SmartTier status.

Relocation Status

Data relocation status.

Relocation Trigger Mode

Relocation triggering mode.

Relocation Paused

Whether SmartTier is suspended.

Estimated Move-up Data

Amount of data that can be moved up.

Estimated Move-down Data

Amount of data that can be moved down.

Estimated Data Relocation Duration

Estimated data migration duration.

Full Protect Threshold(%)

Protection capacity alarm threshold.

File System Total Capacity

Sum of file system capacities specified during file system creation in the storage pool.

Block Size

Block size in the storage pool.

Used Capacity Percent(%)

Percentage of the used capacity to the total capacity.



Provisioning Limit Switch

Switch of setting the thin LUN provisioning limit.

Provisioning Limit

Thin LUN provisioning limit.

Protection Low Threshold(%)

Low threshold of the storage pool protection capacity.

Protection High Threshold(%)

High threshold of the storage pool protection capacity.

Allocated Protection Capacity

Protection capacity of a storage pool after deduplication and compression.

Automatic Deletion Switch

Automatic deletion switch of a storage pool.

Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121072

Downloads: 149

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next