No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ssl_certificate_type

change ssl_certificate_type


The change ssl_certificate_type command is used to change the digital certificate type of OceanStor DeviceManager.


change ssl_certificate_type ssl_certificate_type=?






Digital certificate type to be changed into.

The value can be "0" or "1", where:

  • "0": self-signed certificate.
  • "1": PKI certificate.



Usage Guidelines

This command is executed to change the digital certificate type on terminals. The certificate can be a Public Key Infrastructure (PKI) certificate or a self-signed certificate.


Change the digital certificate type of OceanStor DeviceManager.

admin:/>change ssl_certificate_type ssl_certificate_type=pki 
DANGER: You are about to change the SSL certificate type. After the operation, DeviceManager will be restarted, interrupting services. 
Suggestion: Before running the command, confirm that you want to change the SSL certificate type. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122874

Downloads: 153

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next