No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show consistency_group member

show consistency_group member

Function

The show consistency_group member command is used to query details on members of a consistency group task.

Format

show consistency_group member consistency_group_id=?

Parameters

Parameter

Description

Value

consistency_group_id=?

ID of a consistency group.

To obtain the value, run "show consistency_group general".

Level

Guest

Usage Guidelines

None.

Example

To query details on the members of consistency group "9747215445131264", run the following command.

admin:/>show consistency_group member consistency_group_id=9747215445131264 

ID Health Status Running Status Is Primary Replication Mode Compress Enable  Compress Valid 
---------------- ------------ -------------- ----------- -------------- ---------------  -------------- 
9747215445131232 Normal Normal Yes Asynchronous Yes Yes 
9747215445131233 Normal Normal Yes Asynchronous Yes Yes

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Remote replication ID.

Health Status

Health status.

Running Status

Running status.

Is Primary

Is primary of the remote replication.

Replication Mode

Remote replication mode.

Compress Enable

Is compression enabled.

Compress Valid

Is compression valid.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121384

Downloads: 149

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next