No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show failover_group member

show failover_group member

Function

The show failover_group member command is used to query the members in a failover group on the storage system.

Format

show failover_group member failover_group_id=? [ type=? ]

Parameters

Parameter

Description

Value

failover_group_id=?

Indicates the ID of the failover group.

The value is an integer between 1 and 1024.

type=?

Indicates the type of the object in the failover group.

The value can be "eth_port", "bond_port", where:

  • "eth_port": Ethernet port.
  • "bond_port": bond port.

Level

Guest

Usage Guidelines

  • You can run the "show failover_group member failover_group_id=?" command to query the Ethernet ports and bond port in a specified failover group. Fibre Channel ports in a failover group cannot be queried.
  • You can run the "show failover_group member failover_group_id=1 type=?" command to query information about a failover group with a specified port type.

Example

  • Query the Ethernet network ports and bond ports in failover group "0".
    admin:/>show failover_group member failover_group_id=1 
    ETH Port: 
      ID              Health Status  Running Status  Type       IPv4 Address  IPv6 Address  MAC                Role         Working Rate(Mbps) 
      --------------  -------------  --------------  ---------  ------------  ------------  -----------------  -----------  ------------------ 
      CTE0.A.H0       Normal         Link Up         Host Port  --            --            d4:94:e8:0d:5d:62  INI and TGT  1000                 
      CTE0.A.H1       Normal         Link Up         Host Port  --            --            d4:94:e8:0d:5d:64  INI and TGT  1000                 
      CTE0.A.H2       Normal         Link Down       Host Port  --            --            d4:94:e8:0d:5d:61  INI and TGT  --                   
      CTE0.A.H3       Normal         Link Down       Host Port  --            --            d4:94:e8:0d:5d:63  INI and TGT  --                   
      CTE0.A.IOM0.P0  Normal         Link Down       Host Port  --            --            04:9f:ca:05:33:ea  INI and TGT  --                   
      CTE0.A.IOM0.P1  Normal         Link Down       Host Port  --            --            04:9f:ca:05:33:eb  INI and TGT  --                   
      CTE0.A.IOM0.P2  Normal         Link Down       Host Port  --            --            04:9f:ca:05:33:ec  INI and TGT  --                   
      CTE0.A.IOM0.P3  Normal         Link Down       Host Port  --            --            04:9f:ca:05:33:ed  INI and TGT  --                   
      CTE0.B.H2       Normal         Link Down       Host Port  --            --            d4:94:e8:0d:5d:3e  INI and TGT  --                   
      CTE0.B.H3       Normal         Link Down       Host Port  --            --            d4:94:e8:0d:5d:40  INI and TGT  --                   
      CTE0.B.IOM0.P0  Normal         Link Down       Host Port  --            --            7c:a2:3e:e1:f4:52  INI and TGT  --                   
      CTE0.B.IOM0.P1  Normal         Link Down       Host Port  --         --            7c:a2:3e:e1:f4:53  INI and TGT  --                   
      CTE0.B.IOM0.P2  Normal         Link Down       Host Port  --            --            7c:a2:3e:e1:f4:54  INI and TGT  --                   
      CTE0.B.IOM0.P3  Normal         Link Down       Host Port  --            --            7c:a2:3e:e1:f4:55  INI and TGT  --                   
    Bond Port: 
      ID            Name      Health Status  Running Status  MTU Port ID List          
      ------------  --------  -------------  --------------  ----  ------------------- 
      549772730113  bond_1_1  Normal         Link Up         1500  CTE0.B.H0,CTE0.B.H1  
  • Query the Ethernet network ports in failover group "1".
    admin:/>show failover_group member failover_group_id=1 type=eth_port 
      ID              Health Status  Running Status  Type       IPv4 Address  IPv6 Address  MAC                Role         Working Rate(Mbps) 
      --------------  -------------  --------------  ---------  ------------  ------------  -----------------  -----------  ------------------ 
      CTE0.A.H0       Normal         Link Up         Host Port  --            --            d4:94:e8:0d:5d:62  INI and TGT  1000                 
      CTE0.A.H1       Normal         Link Up         Host Port  --            --            d4:94:e8:0d:5d:64  INI and TGT  1000                 
      CTE0.A.H2       Normal         Link Down       Host Port  --            --            d4:94:e8:0d:5d:61  INI and TGT  --                   
      CTE0.A.H3       Normal         Link Down       Host Port  --          --            d4:94:e8:0d:5d:63  INI and TGT  --                   
      CTE0.A.IOM0.P0  Normal         Link Down       Host Port  --            --            04:9f:ca:05:33:ea  INI and TGT  --                   
      CTE0.A.IOM0.P1  Normal         Link Down       Host Port  --            --            04:9f:ca:05:33:eb  INI and TGT  --                   
      CTE0.A.IOM0.P2  Normal         Link Down       Host Port  --            --            04:9f:ca:05:33:ec  INI and TGT  --                   
      CTE0.A.IOM0.P3  Normal         Link Down       Host Port  --            --            04:9f:ca:05:33:ed  INI and TGT  --                   
      CTE0.B.H2       Normal         Link Down       Host Port  --            --            d4:94:e8:0d:5d:3e  INI and TGT  --                   
      CTE0.B.H3       Normal         Link Down       Host Port  --            --            d4:94:e8:0d:5d:40  INI and TGT  --                   
      CTE0.B.IOM0.P0  Normal         Link Down       Host Port  --            --            7c:a2:3e:e1:f4:52  INI and TGT  --                   
      CTE0.B.IOM0.P1  Normal         Link Down       Host Port  --            --            7c:a2:3e:e1:f4:53  INI and TGT  --                   
      CTE0.B.IOM0.P2  Normal         Link Down       Host Port  --            --            7c:a2:3e:e1:f4:54  INI and TGT  --                   
      CTE0.B.IOM0.P3  Normal         Link Down       Host Port  --            --            7c:a2:3e:e1:f4:55  INI and TGT  --
  • Query the bond port in failover group 1".
    admin:/>show failover_group member failover_group_id=1 type=bond_port 
      ID            Name      Health Status  Running Status  MTU Port ID List          
      ------------  --------  -------------  --------------  ----  ------------------- 
      549772730113  bond_1_1  Normal       Link Up         1500  CTE0.B.H0,CTE0.B.H1

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ETH Port

Indicates the Ethernet port in a failover group.

Bond Port

Indicates the bond port in a failover group.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 115610

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next