No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create hyper_cdp_consistency_group general

create hyper_cdp_consistency_group general


The create hyper_cdp_consistency_group general command is used to create a HyperCDP consistency group for a specified LUN consistency group.


create hyper_cdp_consistency_group general lun_consistency_group_id_list=? name=? [ cdp_consistency_group_id=? ]






ID of a source LUN consistency group.

  • The value is an integer ranging from 1 to 4096.
  • To obtain the value, run the "show lun_consistency_group general" command.
  • You can specify multiple source LUN consistency group IDs separated by commas (,), or an ID range separated by hyphens (-), such as: 0,5-8.


Name of a HyperCDP consistency group.

The value contains 1 to 31 characters including letters, digits, hyphens (-), underscores (_), and periods (.).


When you create HyperCDP consistency groups in a batch, the length of "name=?" cannot exceed 27 characters.


ID of a HyperCDP consistency group. You can set the HyperCDP consistency group ID for the newly created HyperCDP consistency group. It cannot be changed after you specified. The storage system can automatically assign a storage HyperCDP consistency group ID when you do not specify.

The value is an integer ranging from 0 to 99999.



Usage Guidelines

You can create multiple HyperCDP consistency groups for different LUN consistency groups in the same time.


  • Create HyperCDP consistency group "new" for LUN consistency group "1".
    admin:/>create hyper_cdp_consistency_group general lun_consistency_group_id_list=1 name=new 
    create HyperCDP consistency group new successfully.
  • Create three HyperCDP consistency groups, each for LUN consistency groups "1", "3", and "4".
    admin:/>create hyper_cdp_consistency_group general lun_consistency_group_id_list=1,3,4 name=cdp_cg 
    create HyperCDP consistency group cdp_cg0000 successfully. 
    create HyperCDP consistency group cdp_cg0001 successfully. 
    create HyperCDP consistency group cdp_cg0002 successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121990

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next