No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete initiator iscsi

delete initiator iscsi

Function

The delete initiator iscsi command is used to delete Internet Small Computer Systems Interface (iSCSI) initiators. You can disable hosts from accessing the storage resources of the storage system by running this command.

Format

delete initiator iscsi iscsi_iqn_name=?

Parameters

Parameter

Description

Value

iscsi_iqn_name=?

The iSCSI qualified name (IQN) of an iSCSI initiator.

To obtain the value, run "show initiator".

Level

Administrator

Usage Guidelines

  • Before you perform this operation, ensure that you select the correct initiator and services running on the host to which the initiator is added are stopped. Otherwise, running delete initiator iscsi fails.
  • Disconnect the initiator from the host before you delete the initiator.

Example

To delete the iSCSI initiator whose IQN is "iqn.01", run the following command.

admin:/>delete initiator iscsi iscsi_iqn_name=iqn.01 
CAUTION: You are about to delete the initiator. This operation will cause the initiator unavailable. 
Suggestion: Before performing this operation, ensure that the initiator needs to be deleted. 
Do you wish to continue?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 116220

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next