No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ldap configuration

show ldap configuration


The show ldap configuration command is used to query the configuration information on Lightweight Directory Application Protocol (LDAP) servers.


show ldap configuration





Usage Guidelines



To query the configuration information on LDAP servers, run the following command.

admin:/>show ldap configuration 
  IP List                 : 
  Port                    : 389 
  Server Type             : AD 
  Transfer Over SSL       : No 
  Root Directory          : dc=hvs,dc=com 
  Binding DN              : cn=administrator,cn=users,dc=hvs,dc=com 
  User Directory          : cn=users,dc=hvs,dc=com 
  Group Directory         : cn=users,dc=hvs,dc=com 
  User ID Properties      : uSNCreated 
  Username Properties     : sAMAccountName 
  Group ID Properties     : uSNCreated 
  Group Name Properties : sAMAccountName 
  Group Member Properties : member 
  User Object Class       : user 
  Group Object Type       : group

System Response

The following table describes the parameter meanings.



IP List

IP addresses of employed LDAP servers.


ID of the employed listening port on an LDAP server.

Server Type

Type of the LDAP server.

Transfer Over SSL

Whether to enable SSL communication for an LDAP server.

Root Directory

A basic distinguished name (DN).

Binding DN

A DN bound with an LDAP server.

User Directory

An LDAP directory server path under which users will be searched for.

Group Directory

An LDAP directory server path under which user groups will be searched for.

User ID Properties

Attribute of a user ID.

Username Properties

Attribute of a user name.

Group ID Properties

Attribute of a user group ID.

Group Name Properties

Attribute of a user group name.

Group Member Properties

Attribute of a user group member name.

User Object Class

Name of a class to which a user belongs.

Group Object Type

Name of a class to which a user group belongs.

Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 124045

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next