No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snapshot_consistency_group general

change snapshot_consistency_group general


The change snapshot_consistency_group general command is used to modify the properties of a snapshot consistency group.


change snapshot_consistency_group general snapshot_consistency_group_id=? [ name=? ] [ restore_speed=? ] [ description=? ]






ID of a snapshot consistency group.

To obtain the value, run the "show snapshot_consistency_group general" command.


Name of a snapshot consistency group.

The value contains 1 to 127 ASCII characters, including digits, letters, underscores (_), hyphens (-), and periods (.).


Rollback speed of a snapshot consistency group.



Description of a snapshot consistency group.




Usage Guidelines

Only the name, rollback speed, and description of the snapshot consistency group can be modified.


  • Change the name of a snapshot consistency group.
    admin:/>change snapshot_consistency_group general snapshot_consistency_group_id=1 name=snapshotCg1 
    Command executed successfully.
  • Change the rollback speed of a snapshot consistency group.
    admin:/>change snapshot_consistency_group general snapshot_consistency_group_id=24 restore_speed=High 
    WARNING: You are about to change the rollback rate of the snapshot consistency group . This operation may cause heavy service load and decrease the read/write performance of the host. 
    Suggestion: Select the medium speed. If you select the high or highest speed, perform this operation during off-peak hours. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123511

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next