No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_cdp

delete hyper_cdp

Function

The delete hyper_cdp command is used to delete HyperCDP objects.

Format

delete hyper_cdp cdp_id_list=? [ lun_id=? ]

Parameters

Parameter

Description

Value

cdp_id_list=?

ID of a HyperCDP object.

  • The value is an integer ranging from 0 to 1999999.
  • To obtain the value, run "show hyper_cdp general".
  • You can delete multiple HyperCDP objects at the same time. Multiple HyperCDP object IDs are separated by commas (,), or the ID range is separated by hyphens (-), such as: 0,5-8.

lun_id=?

Source LUN ID.

  • The value is an integer ranging from 0 to the maximum number of LUNs – 1.
NOTE:

The maximum number of LUNs supported by different product models varies. For details, see section "Software Specifications" in the product description.

  • To obtain the value, run the "show lun general" command.

Level

Administrator

Usage Guidelines

  • Multiple HyperCDP objects can be deleted at the same time.
  • Before running this command, ensure that the selected HyperCDP object is exactly the one you want to delete and is no longer needed.

Example

Delete HyperCDP object "1".

it is not needed any more. 
admin:/>delete hyper_cdp cdp_id_list=1 
WARNING: You are about to delete HyperCDP object, which is an irreversible operation. This operation will delete the information about the HyperCDP object from the system. 
Suggestion: Before performing this operation, ensure that the selected HyperCDP object is correct and it is not needed any more. 
Have you read warning message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Delete HyperCDP object 1 successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123351

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next