No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show role system

show role system

Function

The show role system command is used to query information about system roles.

Format

show role system [ id=? ]

Parameters

Parameter

Description

Value

id=?

Role ID.

The value must be an integer from 1 to 1023. To obtain the value, run the "show role system" command without parameters.

Level

Super administrator

Usage Guidelines

  • Run the "show role system" command to query information about all system roles.
  • Run the "show role system id=?" command to query information about a specific system role.

Example

  • Query information about all system roles.
    admin:/>show role system 
      
      ID Name                          Type        Group        
      ----  ----------------------------  ----------  ---------- 
      1     Super administrator             built-in      system 
      2     Administrator                   built-in      system 
      3     Security administrator          built-in      system 
      4     Machine administrator           built-in      system 
      5     Network administrator           built-in      system 
      6     SAN resource administrator      built-in      system 
      8     Data protection administrator built-in      system  
      9     Backup administrator            built-in      system  
      10 Maintenance administrator       built-in      system 
      11 Storage administrator           built-in      system 
      65 testrole                    user-defined      system
  • Query information about the system role whose ID is "65".
    admin:/>show role system id=65 
      
      ID          : 65                       
      Name        : testrole                
      Type        : user-defined            
      Group       : system                  
      Description : test_description        
      Permit List : lun:lun

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Role ID.

Name

Role name.

Type

Role type. The value can be built-in or user-defined.

Group

Owning group of a role.

Description

Role description.

Permit List

Role permission list.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122127

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next