No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show cli history

show cli history


The show cli history command is used to query the history for executed commands.


show cli history [ N=? ]






Number of most recently executed commands that you want to query.

The value ranges from 1 to 1024.


Given the storage system can memorize a maximum of 1024 executed commands, a value that is equal to 1024 could display all of the memorized commands.



Usage Guidelines

This command is only used to query the history of executed commands on the current controller.

  • To query all of the commands memorized by the storage system, run show cli history.
  • To query the N (a numeral) commands that you have executed in most recent, run show cli history N=?.


  • To query all of the memorized commands, run the following command.
    admin:/>show cli history      
    [2017-07-20 10:00:38] [admin] [ 2335] [show cli history ] [succeeded] 
    [2017-07-20 10:01:47] [admin] [ 2335] [show cli configuration ] [succeeded] 
    [2017-07-20 10:02:04] [admin] [ 2335] [show event ] [succeeded] 
    [2017-07-20 10:02:29] [admin] [ 2335] [show event number=10 ] [succeeded] 
    [2017-07-20 10:02:36] [admin] [ 2335] [show cli configuration ] [succeeded] 
    [2017-07-20 10:02:47] [admin] [ 2335] [change cli timeout=60 ] [failed] 
    [2017-07-20 10:03:01] [admin] [ 2335] [show safe_strategy ] [succeeded] 
    [2017-07-20 10:03:23] [admin] [ 2335] [change safe_strategy session_expired_time=60 ] [succeeded] 
    [2017-07-20 10:03:25] [admin] [ 2335] [show safe_strategy ] [succeeded] 
    [2017-07-20 10:03:36] [admin] [ 2335] [change cli timeout=60 ] [succeeded] 
    [2017-07-20 10:03:41] [admin] [ 2335] [show cli configuration ] [succeeded] 
    [2017-07-20 10:03:50] [admin] [ 2335] [show cli history N=10 ] [succeeded]
  • To query "5" commands that you have executed in most recent, run the following command:
    admin:/>show cli history N=5 
    [2012-03-31 14:16:03] [admin] [ 2335] [show cli configuration] [succeeded] 
    [2012-03-31 14:16:13] [admin] [ 2335] [change cli silent_enabled=no] [succeeded] 
    [2012-03-31 14:17:11] [admin] [ 2335] [show cli history ] [succeeded] 
    [2012-03-31 14:18:35] [admin] [ 2335] [show cli history ] [succeeded] 
    [2012-03-31 14:18:58] [admin] [ 2335] [show cli history ] [succeeded]

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123515

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next