No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_cdp_consistency_group cancel_restore

change hyper_cdp_consistency_group cancel_restore

Function

change hyper_cdp_consistency_group cancel_restore command is used to cancel the restoration of a HyperCDP consistency group.

Format

change hyper_cdp_consistency_group cancel_restore cdp_consistency_group_id=?

Parameters

Parameter

Description

Value

cdp_consistency_group_id=?

ID of a HyperCDP consistency group.

  • The value is an integer ranging from 0 to 99999.
  • To obtain the value, run "show hyper_cdp_consistency_group general".

Level

Administrator

Usage Guidelines

None.

Example

Cancel the restoration of HyperCDP consistency group "1".

admin:/>change hyper_cdp_consistency_group cancel_restore cdp_consistency_group_id=1 
DANGER: You are about to cancel restoring the data of the HyperCDP object in the HyperCDP consistency group to the LUN in the LUN consistency group. This operation will cause the LUN data in the LUN consistency group to be unavailable. 
Suggestion:  
Before performing this operation, ensure that the LUN data in the LUN consistency group is not required. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 115382

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next