No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove smartqos_policy lun_group

remove smartqos_policy lun_group


The remove smartqos_policy lun_group command is used to remove logical unit number groups from a specific SmartQoS policy.


remove smartqos_policy lun_group smartqos_policy_id=? lun_group_id_list=?






ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy general".


ID list of LUN groups.

To obtain the value, run "show lun_group general". You can specify only one LUN group for now.



Usage Guidelines

After you remove LUN groups from a SmartQoS policy, the policy is no longer effective for the removed LUN groups.


Remove LUN group "3" from SmartQoS policy "0".

admin:/>remove smartqos_policy lun_group smartqos_policy_id=0 lun_group_id_list=3 
WARNING: You are about to remove LUN groups from the SmartQoS policy. This operation may affect the performance of objects in the SmartQoS policy.  
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the selected SmartQoS policy and LUN group are correct. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122686

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next