No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
import crl file

import crl file


The import crl file command is used to import a new certificate revocation list.


import crl file ip=? user=? password=? type=? crl_file=? [ protocol=? ] [ port=? ]






IP address of the FTP/SFTP server.



User allowed by the FTP/SFTP server.

The value contains 1 to 64 characters without colons (:).


Password of a user allowed by the FTP/SFTP server, displayed as asterisks (*).

The value contains 1 to 64 characters.


Certificate revocation list type.

Possible values are:

  • "key_management_center": key management center.
  • "domain_authentication": domain authentication.
  • "hypermetro_arbitration": HyperMetro arbitration.
  • "remote_om_link": remote OM link.


Path for storing the certificate revocation list file on the FTP/SFTP server.

The value is a character string that ends with file name extension ".crl" (case insensitive).


Protocol used for transmitting the new certificate revocation list.

The value can be "FTP" or "SFTP" and the default value is "SFTP".


Port of the FTP/SFTP server.

The value is an integer from 1 to 65535.

  • If protocol=FTP, the default value is "21".
  • If protocol=SFTP, the default value is "22".



Usage Guidelines

  • This command can be used to import a new certificate revocation list into a storage system from the FTP or SFTP server connected to the storage system.
  • This command allows importing a new certificate revocation list for a specified scenario.
  • The certificate revocation list type supported by this command can be "key_management_center", "domain_authentication", "hypermetro_arbitration", or "remote_om_link".


  • The storage system can correctly access the FTP server or SFTP server over the network.
  • The FTP or SFTP service has been enabled on the server.
  • A directory has been created for storing certificate revocation lists.


Import a certificate revocation list into the storage array and activate it.

admin/>import crl file ip= user=admin password=****** type=device_management  crl_file=test.crl protocol=SFTP port=22 
WARNING: You are about to import the certificate revocation list. This operation will revoke the certificate file and may cause the SSL connection failure. 
Suggestion: Before performing this operation, ensure that you accept the aforementioned risks and the certificate revocation list to be imported is correct. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122447

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next