No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_copy_consistency_group general

show hyper_copy_consistency_group general

Function

The show hyper_copy_consistency_group general command is used to query the basic information about a HyperCopy consistency group.

Format

show hyper_copy_consistency_group general [ hyper_copy_consistency_group_id=? ]

Parameters

Parameter

Description

Value

hyper_copy_consistency_group_id

HyperCopy consistency group ID.

The value is an integer ranging from 1 to 4096.

Level

Administrator

Usage Guidelines

None

Example

  • Query information about all HyperCopy consistency groups in the storage system.
    admin:/>show hyper_copy_consistency_group general 
      ID  Name Health Status  Running Status  Copy Speed  Sync Start Time  Sync End Time 
      --  -----  -------------  --------------  ----------  ---------------  ------------- 
      2 a0000  Normal         Unsynchronized Middle      --               --
  • Query information about HyperCopy consistency group "2".
    admin:/>show hyper_copy_consistency_group general hyper_copy_consistency_group_id=2 
      ID                 : 2                 
      Name             : a0000                
      Health Status      : Normal            
      Running Status     : Unsynchronized                     
      Copy Speed         : Middle                    
      Sync Start Time : --                
      Sync End Time      : --                
      Restore Start Time : --                
      Restore End Time : -- 
      Description        : --

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

HyperCopy consistency group ID.

Name

Name of a HyperCopy consistency group.

Health Status

Health status of a HyperCopy pair.

Running Status

Running status of a HyperCopy pair.

Copy Speed

Copy speed.

Sync Start Time

Synchronization start time.

Sync End Time

Synchronization end time.

Restore Start Time

Start time of reverse synchronization.

Restore End Time

End time of reverse synchronization.

Description

Description of a HyperCopy consistency group.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123346

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next