No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change certificate prewarning_time

change certificate prewarning_time

Function

The change certificate prewarning_time command is used to change the expiration warning days of certificates.

Format

change certificate prewarning_time type=? prewarning_time=?

Parameters

Parameter

Description

Value

type=?

Certificate type.

Possible values are:

  • "key_management_center": key management center.
  • "device_management": device management.
  • "domain_authentication": domain authentication.
  • "hypermetro_arbitration": HyperMetro arbitration.
  • "syslog_authentication": Syslog server authentication.
  • "ntp_authentication": NTP server authentication.
  • "call_home_authentication": Call Home server authentication.
  • "remote_om_link": remote OM link.
  • "cloud_backup_authentication": CloudBackup server authentication.
  • "SSO_authentication": SSO authentication.

prewarning_time=?

Certificate expiration warning days.

The value ranges from 7 to 180, expressed in days.

Level

Administrator

Usage Guidelines

This command can change the expiration warning days of certificates in all scenarios.

Example

Change the expiration warning days of certificates.

admin/>change certificate prewarning_time type=device_management prewarning_time=30 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122610

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next