No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create hyper_cdp general

create hyper_cdp general

Function

The create hyper_cdp general command is used to create a HyperCDP object. You can create a point-in-time backup for a LUN by running this command.

Format

create hyper_cdp general lun_id_list=? name=? [ cdp_id=? ]

Parameters

Parameter

Description

Value

lun_id_list=?

Source LUN ID.

  • The value is an integer ranging from 0 to the maximum number of LUNs – 1.
NOTE:

The maximum number of LUNs supported by different product models varies. For details, see section "Software Specifications" in the product description.

  • To obtain the value, run the "show lun general" command.
  • You can specify multiple source LUN IDs separated by commas (,), or an ID range separated by hyphens (-), such as: 0,5-8.

name=?

Name of a HyperCDP object.

The value contains 1 to 31 characters including letters, digits, hyphens (-), underscores (_), and periods (.).

NOTE:

When you create HyperCDP objects in a batch, the length of "name=?" cannot exceed 27 characters.

cdp_id=?

ID of a HyperCDP object. You can set an ID for the newly created HyperCDP object. The ID cannot be changed after you specify it. The storage system can automatically assign an ID to the HyperCDP object when you do not specify the ID.

The value is an integer ranging from 0 to 1999999.

Level

Administrator

Usage Guidelines

You can create multiple HyperCDP objects for different LUNs at the same time.

Example

  • Create a HyperCDP object for LUN "5". The HyperCDP object name is "new_cdp".
    admin:/>create hyper_cdp general lun_id_list=5 name=new_cdp 
    create HyperCDP object new_cdp successfully.
  • Create three HyperCDP objects, each for LUNs "1", "3", and "4".
    admin:/>create hyper_cdp general lun_id_list=1,3,4 name=new_cdp 
    create HyperCDP object new_cdp0000 successfully. 
    create HyperCDP object new_cdp0001 successfully. 
    create HyperCDP object new_cdp0002 successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 116283

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next