No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add hyper_copy_consistency_group hyper_copy

add hyper_copy_consistency_group hyper_copy

Function

The add hyper_copy_consistency_group hyper_copy command is used to add HyperCopy pairs to a specified HyperCopy consistency group. Use this command if consistency management is required for HyperCopy pairs.

Format

add hyper_copy_consistency_group hyper_copy hyper_copy_consistency_group_id=? hyper_copy_id_list=?

Parameters

Parameter

Description

Value

hyper_copy_consistency_group_id

ID of the HyperCopy consistency group to which you want to add members.

To obtain the value, run "show hyper_copy_consistency_group general".

hyper_copy_id_list

ID list of the HyperCopy pairs to be added to a HyperCopy consistency group.

To obtain the value, run "show hyper_copy general". If you want to concurrently add multiple HyperCopy pairs to a HyperCopy consistency group:

  • Separate multiple HyperCopy pair IDs by commas (,). For example, "hyper_copy_id_list=1,2,3,4,5".
  • Specify a HyperCopy pair ID range using a hyphen (-). For example, "hyper_copy_id_list=1-5,7,9-11".

Level

Administrator

Usage Guidelines

None

Example

Add HyperCopy pair "2" to HyperCopy consistency group "1".

admin:/>add hyper_copy_consistency_group hyper_copy hyper_copy_consistency_group_id=1 hyper_copy_id_list=2 
Add HyperCopy 2 to HyperCopy consistency group successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 115220

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next