No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_cdp_schedule general

show hyper_cdp_schedule general

Function

The show hyper_cdp_schedule general command is used to query information about a HyperCDP schedule.

Format

show hyper_cdp_schedule general [schedule_id=?]

Parameters

Parameter

Description

Value

schedule_id=?

HyperCDP schedule ID.

To obtain the value, run "show hyper_cdp_schedule general". The value is an integer from 1 to 512.

Level

Guest

Usage Guidelines

  • Before performing the operation, confirm that the schedule ID is correct and exists.
  • The command with a schedule ID queries information about a schedule. The command without a schedule ID queries information about all schedules.

Example

  • Query information about HyperCDP schedule "1".
    admin:/>show hyper_cdp_schedule general schedule_id=1 
      ID                     : 1                                  
      Name                   : schedule001                    
      Health Status          : Normal                             
      Running Status         : Enabled                            
      Week Days              : --                                 
      Week Start Time        : --                                 
      Week Reserved Num      : --                                 
      Frequency Time       : 0 hour(s),0 minute(s),30 second(s)  
      Frequency Reserved Num : 1  
      Hours                  : --                                 
      Start Minute           : -- 
      Day Reserved Num       : -- 
      Month Days             : --                                 
      Month Start Time       : --                                 
      Month Reserved Num     : -- 
      Last Execution Time : 2018-07-22/10:29:00 UTC+08:00      
      Last Execution Result  : Success 
      Description            :
  • Query information about all HyperCDP schedules.
    admin:/>show hyper_cdp_schedule general               
      ID  Name             Health Status  Running Status  Last Execution Time            Last Execution Result 
      --  ---------------  -------------  --------------  -----------------------------  --------------------- 
      1 schedule001  Normal         Enabled         2018-07-22/10:30:00 UTC+08:00  Success                 
      2 schedule002  Normal         Enabled         2018-07-22/10:30:00 UTC+08:00  Success

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

HyperCDP schedule ID.

Name

HyperCDP schedule name.

Health Status

Health status of a HyperCDP schedule.

Running Status

Running status of a HyperCDP schedule.

Week Days

Day in a week when HyperCDP objects are created. The value is an integer from 0 to 6 (indicating from Sunday to Saturday).

Week Start Time

Time when HyperCDP objects are created. The value is in the format of "HH:MM". It is a point in time between "00:00-23:59".

Week Reserved Num

Reserved number of HyperCDP objects created weekly. The value is an integer from 1 to 256.

Frequency Time

Fixed interval. The value can be 10 or an integer multiple of 30 ranging from 30 to 86400 (unit: second).

Frequency Reserved Num

Reserved number of HyperCDP objects created at fixed intervals. The value is an integer from 1 to 256.

Hours

Hour in a day when HyperCDP objects are created. The value is an integer from 0 to 23.

Start Minute

Minute when HyperCDP objects are created in pointed hour. The value is between "0-59".

Day Reserved Num

Reserved number of HyperCDP objects created daily. The value is an integer from 1 to 60000.

Month Days

Day in a month when HyperCDP objects are created. The value is an integer from 1 to 31 (indicating which day in the month).

Month Start Time

Time when HyperCDP objects are created. The value is in the format of "HH:MM". It is a point in time between "00:00-23:59".

Month Reserved Num

Reserved number of HyperCDP objects created monthly. The value is an integer from 1 to 256.

Last Execution Time

Last execution time.

Last Execution Result

Last execution result.

Description

Description.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 115116

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next