No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove smartqos_policy hierarchical

remove smartqos_policy hierarchical


The remove smartqos_policy hierarchical command is used to remove normal SmartQoS policies from a specific hierarchical SmartQoS policy.


remove smartqos_policy hierarchical hierarchical_smartqos_policy_id=? normal_smartqos_policy_id_list=?






ID of a hierarchical SmartQoS policy.

To obtain the value, run "show smartqos_policy general".


IDs of the normal SmartQoS policies that you want to remove.

To obtain the value, run "show smartqos_policy general".

You can specify multiple SmartQoS policy IDs separated by commas (,), or ID range separated by hyphens(-), such as: 0,5-8.

A maximum of 64 SmartQoS policies can be added.



Usage Guidelines

After you remove normal SmartQoS policies from a hierarchical SmartQoS policy, the policy is no longer effective for the removed SmartQoS policies and the added objects.


To remove SmartQoS policies "3", "4", and "5" from SmartQoS policy "0", run the following command.

admin:/>remove smartqos_policy hierarchical hierarchical_smartqos_policy_id=0 normal_smartqos_policy_id_list=3,4,5 
WARNING: You are about to remove normal traffic control policy from hierarchical traffic control policy. 
This operation may affect object performance. 
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct traffic control policy and LUN are selected. 
Have you read warning message carefully?(y/n)y 
Are you sure really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123584

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next