No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk light

change disk light

Function

The change disk light command is used to turn on or turn off the location indicator of a specific hard disk.

Format

change disk light disk_id=? on_or_off=?

Parameters

Parameter

Description

Value

disk_id=?

ID of the hard disk.

To obtain the value, run "show disk general".

on_or_off=?

Whether to turn on or turn off the location indicator of a hard disk.

The value can be "on" or "off", where:

  • "on": The location indicator of a hard disk will be turned on.
  • "off": The location indicator of a hard disk will be turned off.

Level

Administrator

Usage Guidelines

  • By turning on the location indicator of a hard disk, you can find the physical location of the hard disk easily.
  • This command supports 2200 V3,2600 V3,5300 V3,5500 V3,5600 V3,5800 V3,6800 V3,18500 V3,18800 V3.

Example

To turn on the location indicator of the hard disk whose ID is "DAE000.0", run the following command. The command output varies depending on a specific product.

admin:/>change disk light disk_id=DAE000.0 on_or_off=on 
Command executed successfully. 


System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122398

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next