No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change bond_port general

change bond_port general

Function

The change bond_port general command is used to change the MTU of a bond port.

Format

change bond_port general { bond_port_id=? | bond_port_name=? } mtu=?

Parameters

Parameter

Description

Value

bond_port_id=?

Bond port ID.

To obtain the value, run the "show bond_port" command.

bond_port_name=?

Bond port name.

To obtain the value, run the "show bond_port" command.

mtu=?

MTU of the port.

The value is an integer ranging from 1280 to 9000.

Level

Administrator

Usage Guidelines

  • Run the "show bond_port" command to query all bond ports.
  • Run the "change bond_port general { bond_port_id=? | bond_port_name=? } mtu=?" command to change the MTU of a specific bond port.

Example

  • Changing the MTU of bond port "139009".
    admin:/>change bond_port general bond_port_id=139009 mtu=4000 
    DANGER:You are about to modify the MTU settings for the bond port. This operation may interrupt services or cause service exceptions.  
    Suggestion: Before performing this operation, ensure that the modification is necessary. 
    Have you read danger alert message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n) 
    Command executed successfully.
  • Changing the MTU of bond port "bond_1_1".
    admin:/>change bond_port general bond_port_name=bond_1_1 mtu=4000 
    DANGER:You are about to modify the MTU settings for the bond port. This operation may interrupt services or cause service exceptions.  
    Suggestion: Before performing this operation, ensure that the modification is necessary. 
    Have you read danger alert message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n) 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123329

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next