No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file package_result

show file package_result

Function

The show file package_result command is used to check the file exporting status.

Format

show file package_result file_type=? [ disk_id=? ] [ controller_id=? ]

Parameters

Parameter

Description

Value

file_type=?

Type of a file that you want to export.

The value can be "log", "all_log", "smart", "workload", "call_home", "diagnostic_file", "isolated_disklog", "running_disklog", "cloudbackup_log", "all_cloudbackup_log", or "capacity_file", where:

  • "log": indicates recent logs.
  • "all_log": indicates all logs of the system.
  • "smart": indicates disk SMART info.
  • "workload": indicates workload.
  • "call_home": indicates Call Home data.
  • "diagnostic_file": indicates the diagnostic file.
  • "isolated_disklog": indicates isolated disk log info.
  • "running_disklog": indicates running disk log info.
  • "cloudbackup_log": indicates recent cloudbackup log info.
  • "all_cloudbackup_log": indicates all cloudbackup log info.
  • "capacity_file": indicates the historical capacity information file.

disk_id=?

Disk ID.

To obtain the value, run "show disk general" without parameters. This parameter can be specified only when "file_type" is set to "running_disklog".

controller_id=?

Controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where the "X" is an integer from 0 to 3, for example: "0A","1C". This parameter can be specified only when "file_type" is set to "running_disklog".

Level

Administrator

Usage Guidelines

None

Example

  • Check the log exporting status where the file type is "log".
    admin:/>show file package_result file_type=log 
      Total Result  Controller ID  Single Result 
      ------------  -------------  ------------- 
      Successful 0A             Successful 
      --            0B             Successful
  • Check the Call Home data exporting status where the file type is "call_home".
    admin:/>show file package_result file_type=call_home 
      Total Result  Controller ID  Single Result 
      ------------  -------------  ------------- 
      Successful 0A             Successful 
      --            0B             Successful
  • Check the diagnostic file exporting status where the file type is "diagnostic_file".
     admin:/>show file package_result file_type=diagnostic_file 
      Total Result  Controller ID  Single Result 
      ------------  -------------  ------------- 
      Successful      --       -- 
  • Check the exporting status of the historical capacity information file where the file type is "capacity_file".
    admin:/>show file package_result file_type=capacity_file 
      Total Result  Controller ID  Single Result 
      ------------  -------------  ------------- 
      Successful      --       -- 
  • Check the exporting status of the running disk log file where the file type is "running_disklog".
    admin:/>show file package_result file_type=running_disklog disk_id=DAE010.5 controller_id=0A 
      Total Result  Controller ID  Single Result 
      ------------  -------------  ------------- 
      Successful      --             --       
  • Check the exporting status of the isolated disk log file where the file type is "isolated_disklog".
    admin:/>show file package_result file_type=isolated_disklog 
      Total Result  Controller ID  Single Result 
      ------------  -------------  ------------- 
      Successful     0A       Successful      
     --            0B       Successful      
     --            1A       Successful      
     --            1B       Successful
  • Check the full CloudBackup data exporting status where the file type is "all_cloudbackup_log".
    admin:/>show file package_result file_type=all_cloudbackup_log 
      Total Result  Controller ID  Single Result 
      ------------  -------------  ------------- 
      Successful 0A             Successful 
      --            0B             Successful
  • Check the recent CloudBackup data exporting status where the file type is "cloudbackup_log".
    admin:/>show file package_result file_type=cloudbackup_log 
      Total Result  Controller ID  Single Result 
      ------------  -------------  ------------- 
      Successful 0A             Successful 
      --            0B             Successful

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Controller ID

Controller ID.

Total Result

Overall result of exporting logs.

Single Result

Overall result of exporting logs by a single controller.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123066

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next