No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show lun_migration general

show lun_migration general


The show lun_migration general command is used to query LUN migration properties.


show lun_migration general [ source_lun_id=? ]






Source LUN ID.

To obtain the value, run the "show lun_migration general" command without parameters.



Usage Guidelines

  • Run the "show lun_migration general" command to batch query properties of all LUN migration tasks.
  • Run the "show lun_migration general source_lun_id=?" command to query properties of a specific LUN migration task.


  • Batch query the properties of all LUN migration tasks.
    admin:/>show lun_migration general 
    Source LUN ID Source LUN Name Target LUN ID Target LUN Name Running Status Speed Process(%) Work Mode  
    ------------- --------------- ------------- --------------- -------------- ------ ---------- ---------  
    0 ff0000 10 ff0010 Migrated Middle -- Manual  
    1 ff0001 11 ff0011 Migrated Middle -- Manual  
    2 ff0002 12 ff0012 Migrated Middle -- Manual
  • Query the properties of a specific LUN migration task.
    admin:/>show lun_migration general source_lun_id=0 
      Source LUN ID     : 0                             
      Source LUN Name : LUN_0                         
      Target LUN ID     : 1                             
      Target LUN Name : LUN_1                         
      Running Status : Normal                        
      Speed             : Middle                        
      Process(%)        : --                            
      Start Time        : 2019-04-10/11:34:58 UTC+08:00  
      End Time          : --                            
      Work Mode         : Manual                        
      Period Speed      : High                          
      Period Start Day  : 2019-03-22                    
      Period End Day : 2019-03-24                    
      Period Start Time : 23:00                     
      Duration          : 2 hour(s),0 minute(s)         
      Work Speed        : -- 

System Response

The following table describes the parameter meanings.



Source LUN ID

Indicates the source LUN ID.

Source LUN Name

Indicates the source LUN name.

Target LUN ID

Indicates the target LUN ID.

Target LUN Name

Indicates the target LUN name.

Running Status

Indicates the running status.


Indicates the speed.


Indicates the migration progress.

Start Time

Indicates the start time of the migration.

Work Speed

Actual migration speed.

End Time

Indicates the end time of the migration.

Work Mode

Indicates the split mode.

Period Speed

Migration speed in a specified period.

Period Start Day

Start day of a specified period.

Period End Day

End day of a specified period.

Period Start Time

Start time of a specified period.


Duration of a specified period.

Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122083

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next