No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete mapping_view

delete mapping_view

Function

The delete mapping_view command is used to delete mapping views.

Format

delete mapping_view mapping_view_id=?

Parameters

Parameter

Description

Value

mapping_view_id=?

ID of a mapping view.

To obtain the value, run "show mapping_view general".

Level

Administrator

Usage Guidelines

  • Before running this command, ensure that the selected mapping view is exactly the one you want to delete and that no service associated with the hosts in the mapping view is running.
  • Before deleting a mapping view, remove all the host groups, LUN groups, and port groups from the mapping view.

Example

To delete mapping view "1", run the following command:

admin:/>delete mapping_view mapping_view_id=1 
WARING: You are about to delete mapping view. This operation cannot be undone. This operation will delete the information about the mapping view from the system. 
Suggestion: Before performing this operation, ensure that the selected mapping view is no longer necessary. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 124156

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next