No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add disk_domain disk

add disk_domain disk

Function

The add disk_domain disk command is used to add disks to a disk domain.

Format

add disk_domain disk disk_domain_id=? disk_list=?

Parameters

Parameter

Description

Value

disk_domain_id=?

ID of a disk domain to which you want to add disks.

To obtain the value, run "show disk_domain general".

disk_list=?

ID list of disks that you want to add to a disk domain.

The value can be "all", a disk ID range, or a disk ID list, where:

  • "all": All free disks are added to a disk domain.
  • Disk ID range: The value is in the format of start disk ID-end disk ID, for example, DAE000.1-5.
  • Disk ID list: Multiple disk IDs are separated by commas (,), for example, DAE000.1,DAE000.2,DAE000.3.

You can run the "show disk general" command to obtain the current system disk list.

Level

Administrator

Usage Guidelines

None

Example

Add SSDs to disk domain "0".

admin:/>add disk_domain disk disk_domain_id=0 disk_list=all 
WARNING: You are about to add disks to the disk domain. If too much disk space is added, the disk domain space cannot be fully utilized. Use the evaluation tool(eDesigner) to evaluate capacity expansion and then perform capacity expansion. 
Suggestion: Before performing this operation, ensure that you have correctly selected the disks and disk domain. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123929

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next