No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show mapping_view general

show mapping_view general

Function

The show mapping_view general command is used to query information about mapping views of a storage system.

Format

show mapping_view general [ mapping_view_id=? ] [ detail=? ]

Parameters

Parameter

Description

Value

mapping_view_id=?

ID of a mapping view.

To obtain the value, run "show mapping_view general" without parameters.

detail=?

Whether to enable the function of querying details about a mapping view.

-

Level

Guest

Usage Guidelines

  • To query information about all mapping views of a storage system, run "show mapping_view general".
  • To query information about a specific mapping view, run "show mapping_view general mapping_view_id=?".
  • To query details about a specific mapping view, run "show mapping_view general mapping_view_id=? detail=enable".

Example

  • Query information about mapping view "1".
    admin:/>show mapping_view general mapping_view_id=1 
      
      Mapping View ID : 1 
      Mapping View Name : MappingView001 
      Inband Command       : Disable 
      LUN Group ID        : 1 
      LUN Group Name      : LUNGroup001 
      Port Group ID       : 1 
      Port Group Name      : PortGroup001 
      Host Group ID       : 1 
      Host Group Name      : HostGroup001 
  • Query details about mapping view "1".
     admin:/>show mapping_view general mapping_view_id=0 detail=enable 
      
    ------------ Host Information------------- 
      ID  Name Health Status  Operating System  IP Address  Model  Location 
      --  ------  -------------  ----------------  ----------  -----  -------- 
      1 host_1  Normal         Linux             --                            
      2 host_2  Normal         Linux             --                            
      3 host_3  Normal         Linux             --                            
    ------------ FC and ISCSI Initiator Information------------- 
      WWN               Running Status  Free  Alias  Host ID  Multipath Type  Failover Mode  Path Type  Special Mode Type 
      ----------------  --------------  ----  -----  -------  --------------  -------------  ---------  ----------------- 
      6d494e81000e9d01  Offline         No --     1        Default         --             --         --                  
      6d494e81000e9d02  Offline         No --     1        Default         --             --         --                  
      iSCSI IQN  Running Status  Free  Alias  Host ID  CHAP Enabled  CHAP User  Multipath Type  CHAP Target User  Discovery Chap Type  Normal Chap Type  Failover Mode  Path Type  Special Mode Type 
      ---------  --------------  ----  -----  -------  ------------  ---------  --------------  ----------------  -------------------  ----------------  -------------  ---------  ----------------- 
      iscsi_1 Offline         No --     2        No            --         Default         --                --                   --                --             --         --                  
      iscsi_2 Offline         No --     2        No            --         Default         --                --                   --                --             --         --                  
    ------------ IB Initiator Information------------- 
      WWN               Name  Health Status  Running Status  Is Free  Multi Path Type  Failover Mode  Path Type  Special Mode Type 
      ----------------  ----  -------------  --------------  -------  ---------------  -------------  ---------  ----------------- 
      6d494e81000e9d03  -- Normal         Offline         No       Default          --             --         --                  
      6d494e81000e9d04  -- Normal         Offline         No       Default          --             --         --                  
    ------------ LUN Information------------- 
      ID  Name      Pool ID  Capacity  Health Status  Running Status  Type WWN                                
      --  --------  -------  --------  -------------  --------------  -----  -------------------------------- 
      0 lun_0000  0         1.000MB  Normal         Online          Thick  6d494e81000e9de300601d4f00000001 
      1 lun_0001  0         1.000MB  Normal         Online          Thick  6d494e81000e9de300601d8300000002 
      2 lun_0002  0         1.000MB  Normal         Online          Thick  6d494e81000e9de300601d9f00000003 
    ------------ Port Information------------- 
    ETH port: 
      ID              Health Status  Running Status  Type       IPv4 Address  IPv6 Address  MAC                Role         Working Rate(Mbps)  Enabled  Max Speed(Mbps) 
      --------------  -------------  --------------  ---------  ------------  ------------  -----------------  -----------  ------------------  -------  --------------- 
      CTE0.B.IOM1.P0  Normal         Link Down       Host Port  --            --            00:01:02:03:04:05  INI and TGT  --                  Yes      10000             
    FC port: 
      ID          Health Status  Running Status  Type       Working Rate(Mbps)  WWN               Role         Working Mode  Configured Mode  Enabled  Max Speed(Mbps)  Number Of Initiators 
      ----------  -------------  --------------  ---------  ------------------  ----------------  -----------  ------------  ---------------  -------  ---------------  -------------------- 
      CTE0.A3.P0  Normal         Link Up         Host Port  8000                2208c88d8370071a  INI and TGT  FC-AL         Auto-Adapt       Yes      16000            1                      
    FCoE port: 
      ID              Health Status  Running Status  Type       Working Rate(Mbps)  WWN               Role  Enabled  Max Speed(Mbps)  Number Of Initiators 
      --------------  -------------  --------------  ---------  ------------------  ----------------  ----  -------  ---------------  -------------------- 
      CTE0.B.IOM1.P0  Normal         Link Down       Host Port  --                  2000000102030405  TGT Yes      10000            0                      
    IB port:

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Mapping View ID

ID of a mapping view.

Mapping View Name

Name of a mapping view.

Inband Command

Whether the inband command is enabled.

Work Mode

Work mode of mapping view.

LUN Group ID

Associated LUN group ID.

LUN Group Name

Associated LUN group name.

Port Group ID

Associated port group ID.

Port Group Name

Associated port group name.

Host Group ID

Associated host group ID.

Host Group Name

Associated host group name.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 116689

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next