No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show lun_workload_type general

show lun_workload_type general

Function

The show lun_workload_type general command is used to query information on existing workload types of the storage system.

Format

show lun_workload_type general [ id=? | name=? ]

Parameters

Parameter

Description

Value

id=?

Indicates the workload type ID.

To obtain the value, run "show lun_workload_type general" without parameters.

name=?

Indicates the workload type name.

To obtain the value, run "show lun_workload_type general" without parameters.

Level

Guest

Usage Guidelines

  • To query information on existing workload types of the storage system, run "show lun_workload_type general".
  • To query information on a specific workload type, run "show lun_workload_type general id=?".
  • To query information on a specific workload type, run "show lun_workload_type general name=?".

Example

  • To query information on existing workload types of the storage system, run the following command.
    admin:/>show lun_workload_type general 
      
      ID  Name                            IO Size  Compression Enabled  Dedup Enabled  Type       
      --  ------------------------------  -------  -------------------  -------------  -------- 
      1 Oracle_OLTP                    8K       Yes                  Yes            Reserved 
      2 Oracle_OLAP                    16K      Yes                  Yes            Reserved
  • To query information on workload type "Oracle_OLTP".
    admin:/>show lun_workload_type general name=Oracle_OLTP 
    ID : 1  
    Name : Oracle_OLTP 
    IO Size : 8KB 
    Compression Enabled : Yes 
    Dedup Enabled : Yes  
    Type : Reserved 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Indicates the workload type ID.

Name

Indicates the workload type name.

IO Size

Indicates the request size of the workload type.

Compression Enabled

Enable compression or not.

Dedup Enabled

Enable deduplication or not.

Type

Indicates the category of workload type.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 116378

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next