No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show route general

show route general

Function

The show route general command is used to query route configuration of storage system ports.

Format

show route general [ port=? ]

Parameters

Parameter

Description

Value

port=?

Port.

To obtain the value, run "show route general".

Level

Guest

Usage Guidelines

None.

Example

  • Query route configuration of all ports. The command output varies depending on a specific product.
    admin:/>show route general 
    Port     Destination  Mask        Gateway       Type 
    ------- ------- ----------- ------------ ----------- 
    ENG0.A3.P0  192.168.3.0  255.255.255.0 192.168.1.1 ETH 
    ENG0.A3.P0  192.168.4.1  255.255.255.255  192.168.1.2 ETH 
    ENG0.A3.P0  0.0.0.0     0.0.0.0      192.168.1.3 ETH 
    ENG0.A4.P0  10.1.1.0 255.0.0.0     10.1.5.3 ETH 
    ENG0.A4.P0  10.3.2.0 255.255.255.0 10.3.2.56 ETH 
    ENG0.A4.P0  192.168.3.0 255.255.255.0 192.168.1.1 BOND 
    bond_1_1 192.168.3.0 255.255.255.0 192.168.1.1 BOND
  • Query route configuration of port ENG0.A4.P0. The command output varies depending on a specific product.
    admin:/>show route general port=ENG0.A4.P0 
    Port Destination  Mask Gateway type 
    -------  ------- -----------  --------------- ----------- 
    ENG0.A4.P0  10.3.2.0 255.255.255.0  10.3.2.56 ETH 
    ENG0.A4.P0  192.168.3.0  255.255.255.0  192.168.1.1  BOND

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Port

Port.

Destination

Destination address of the port route.

Mask

Subnet mask of the port route.

Gateway

Gateway of the port route.

Type

Port type.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 114416

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next