No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_cdp_schedule general

change hyper_cdp_schedule general

Function

The change hyper_cdp_schedule general command is used to modify information about a HyperCDP schedule, including the name, schedule policy type, and time.

Format

change hyper_cdp_schedule general schedule_id=? { name=? period=? } * [ day_of_week=? ] [ week_start_time=? ] [ week_reserved_num=? ] [ frequency_time_unit=? ] [ frequency_time=? ] [ frequency_reserved_num=? ] [ hour_of_day=? ] [ minute_of_hour=? ] [ day_reserved_num=? ] [ day_of_month=? ] [ month_start_time=? ] [ month_reserved_num=? ] [ description=? ]

Parameters

Parameter

Description

Value

schedule_id=?

HyperCDP schedule ID.

The value is an integer from 1 to 512.

name=?

HyperCDP schedule name.

The value contains 1 to 31 ASCII characters, including letters, digits, periods (.), underscores (_), and hyphens (-).

period=?

Policy type of a HyperCDP schedule.

The value can be "weekly", "frequency", "daily", or "monthly", where:

  • "weekly": creates HyperCDP objects weekly.
  • "frequency": creates HyperCDP objects at fixed intervals.
  • "daily": creates HyperCDP objects daily.
  • "monthly": creates HyperCDP objects monthly.

You can specify multiple types of schedules separated by commas (,), such as: "period=frequency,weekly".

day_of_week=?

Day in a week when HyperCDP objects are created.

  • The value can be "mon", "tue", "wed", "thu", "fri", "sat", or "sun". For example, "day_of_week=mon".
  • You can specify multiple days separated by commas (,), such as: "day_of_week=mon,tue".

week_start_time=?

Time in a week when HyperCDP objects are created.

The value is in the format of "HH:MM". It is a point in time between "00:00-23:59".

week_reserved_num=?

Reserved number of HyperCDP objects created weekly.

The value is an integer from 1 to 256.

frequency_time_unit=?

Unit of the fixed interval.

The value can be:

  • "hour": indicates hours.
  • "minute": indicates minutes.
  • "second": indicates seconds.

frequency_time=?

Fixed interval.

  • If the value of "frequency_time_unit" is set to "hour", "frequency_time" ranges from 1 to 24.
  • If the value of "frequency_time_unit" is set to "minute", "frequency_time" ranges from 1 to 1440.
  • If the value of "frequency_time_unit" is set to "second", "frequency_time" is 10, 20, 30, 40 or 50.

frequency_reserved_num=?

Reserved number of HyperCDP objects created at fixed intervals.

The value is an integer from 1 to 60000.

hour_of_day=?

Hour of a day when HyperCDP objects are created.

The value is an integer from 0 to 23 (unit: hour).

If multiple values are selected, separate them with commas (,). For example, "hour_of_day=1,2,3".

minute_of_hour=?

Minute in a day when HyperCDP objects are created.

The value is an integer from 0 to 59.

day_reserved_num=?

Reserved number of HyperCDP objects created daily.

The value is an integer from 1 to 256.

day_of_month=?

Day in a month when HyperCDP objects are created.

The value is an integer from 1 to 31. If multiple values are selected, separate them with commas (,). For example, "day_of_month=1,21".

month_start_time=?

Time in a month when HyperCDP objects are created.

The value is in the format of "HH:MM". It is a point in time between "00:00-23:59".

month_reserved_num=?

Reserved number of HyperCDP objects created monthly.

The value is an integer from 1 to 256.

description=?

Description.

-

Level

Administrator

Usage Guidelines

  • Before performing this operation, confirm that the schedule ID is correct.
  • Before performing the operation, confirm that the name of the schedule to be modified is correct and exits.
  • If period=weekly is set, parameters day_of_week, week_start_time, and week_reserved_num are optional.
  • If period=frequency is set, parameters frequency_time and frequency_reserved_num are optional.
  • If period=daily is set, parameters hour_of_day and minute_of_hour are optional.
  • If period=monthly is set, parameters day_of_month and month_start_time are optional.

Example

Modify the properties of HyperCDP schedule "1".

admin:/> change hyper_cdp_schedule general schedule_id=1 name=auto1 period=weekly,frequency day_of_week=mon week_start_time=12:45 week_reserved_num=2 frequency_time_unit=minute frequency_time=2 frequency_reserved_num=3 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100049140

Views: 103335

Downloads: 119

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next