No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ib_initiator general

change ib_initiator general

Function

The change ib_initiator general command is used to change the properties of an IB initiator.

Format

change ib_initiator general wwn=? [ name=? ] [ multi_path_type=? [ failover_mode=? [ special_mode_type=? ] ] [ path_type=? ] ]

Parameters

Parameter

Description

Value

wwn=?

IB initiator WWN.

To obtain the value, run "show ib_initiator general".

name=?

Initiator name.

The value is 1 to 31 characters in length. Characters include numbers, letters, periods (.), underscores (_), and hyphens (-).

multi_path_type=?

Multipathing mode.

The value can be "default" or "third-party", where:

  • default: Huawei multipathing software is used.
  • third-party: Third-party multipathing software is used.

The default value is "default".

failover_mode=?

Failover mode of an initiator.

The value can be "old_alua", "common_alua", "no_alua", or "special_mode", where:

  • old_alua: ALUA of an earlier version.
  • common_alua: common ALUA.
  • no_alua: ALUA not used.
  • special_mode: special mode.

The default value is "common_alua".

path_type=?

Path type of an initiator.

The value can be "non-optimized" or "optimized", where:

  • optimized: optimized path.
  • non-optimized: non-optimized path.

The default value is "optimized".

special_mode_type=?

Special mode type of initiator.

The value can be "mode0", "mode1", "mode2", and "mode3", where:

  • mode0: special mode 0.
  • mode1: special mode 1.
  • mode2: special mode 2.
  • mode3: special mode 3.

Level

Administrator

Usage Guidelines

None

Example

  • To change the properties of an IB initiator, run the following command.
    admin:/>change ib_initiator general wwn=0000000000005678 name=new 
    Command executed successfully.
  • Set the attributes of the IB initiator whose WWN is "455856585f654578" as follows: Multipathing mode to "Third-party" Failover mode to "common_alua" Path type to "Optimized".
    admin:/>change ib_initiator general wwn=455856585f654578 multi_path_type=Third-party failover_mode=common_alua path_type=Optimized 
    DANGER: You are about to change the multipathing configuration of the initiator. This operation changes the host multipathing software's policy of managing paths of storage LUNs mapped to the host. If you do not configure the multipathing correctly, the host may have compatibility problems. 
    Suggestion: Before performing this operation, ensure that you know the correct configuration method clearly. In storage systems with one array or HyperMetro storage systems, all initiators mapped to the same physical host must have the same multipathing type and failover mode. 
    Have you read danger alert message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 116681

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next