No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show port_group port

show port_group port

Function

The show port_group port command is used to query information about ports in a port group.

Format

show port_group port port_group_id=? [ port_type=? ]

Parameters

Parameter

Description

Value

port_group_id=?

ID of a port group that you want to query.

To obtain the value, run "show port_group general".

port_type=?

Type of a port that you want to query.

The value can be "FC", "ETH", "FCoE" or "IB", where:

  • "FC": indicates Fibre Channel ports.
  • "ETH": indicates ETH ports.
  • "FCoE": indicates FCoE ports.
  • "IB": indicates IB ports.

Level

Guest

Usage Guidelines

None

Example

Query information about ports in port group "0". The ID and output vary depending on a specific product.

admin:/>show port_group port port_group_id=0 
ETH port: 
FC port: 

ID Health Status Running Status Type Working Rate(Mbps) 
---------- ------------- -------------- --------- ------------------ 
ENG0.A2.P1 Normal Link Down Host Port -- 
ENG0.A2.P2 Normal Link Down Host Port -- 

WWN Role Working Mode Configured Mode 
---------------- ----------- ------------ --------------- 
0000000002010101 INI and TGT -- Auto-Adapt 
0000000002010202 INI and TGT -- Auto-Adapt 
FCoE port:

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

ID of a port.

Health Status

Health status of a port.

Running Status

Running status of a port.

Type

Port type.

IPv4 Address

IPv4 address of an ETH port.

IPv6 Address

IPv6 address of an ETH port.

MAC

MAC address of an ETH port.

Role

Role of a port in the link.

Working Rate(Mbps)

Work speed of a port.

Enabled

Weather the port is enabled.

Max Speed(Mbps)

Maximum work speed of a port.

WWN

WWN of a port.

Channel Number

Channel number of a port.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121431

Downloads: 149

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next