No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ftds switch

show ftds switch

Function

The show ftds switch command is used to check whether the Flow Tracing & Diagnosing System (FTDS) function is enabled.

Format

show ftds switch

Parameters

None

Level

Guest

Usage Guidelines

Run this command to check whether the FTDS function is enabled. "On" indicates that the function is enabled. "Off" indicates that the function is disabled.

Example

  • Show the switch status of FTDS in guest view.
    admin:/>show ftds switch 
    Switch: On 
    Trace Switch: Off 
    Phase Switch: On 
    Delay Switch: On 
    Count Switch: On
  • Show the switch status of FTDS in developer view.
    developer:/>show ftds switch 
    Switch: On 
    Trace Switch: Off 
    Phase Switch: On 
    Delay Switch: On 
    Count Switch: On 
    Workload Switch: Off

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Switch

Main switch.

Trace Switch

Tracing switch.

Phase Switch

Phase switch.

Delay Switch

Delay switch.

Count Switch

Count switch.

Workload Switch

Workload collection switch.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 114774

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next