No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_migration_split consistency

change lun_migration_split consistency

Function

The change lun_migration_split consistency command is used to split LUN migrations.

Format

change lun_migration_split consistency source_lun_id_list=?

Parameters

Parameter

Description

Value

source_lun_id_list=?

IDs of source LUNs.

To obtain the value, run "show lun_migration general".

To split multiple source LUNs in a batch, separate the IDs of those LUNs by commas (,), or separate ID ranges by hyphens (-), such as: 0, 5-8.

A maximun of 1024 source LUNs are allowed to split once.

Level

Administrator

Usage Guidelines

None

Example

To split the LUN migrations whose source LUNs are LUN 3 and 4, run the following command.

admin:/>change lun_migration_split consistency source_lun_id_list=3,4 
CAUTION: You are about to split LUN migrations. Only source LUNs can be read and written after splitting. 
Suggestion: Before performing this operation, ensure that the current service load is light. 
Do you wish to continue?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123306

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next