No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change host

change host

Function

The change host command is used to modify the attributes of a host including the host name, location, operating system type, and IP address.

Format

change host host_id=? { name=? | operating_system=? | location=? | model=? | ip=? | network_name=? } *

Parameters

Parameter

Description

Value

host_id=?

ID of a host that you want to modify its attributes.

To obtain the value, run "show host general".

name=?

An updated name of a host.

The value contains 1 to 31 characters including letters, digits, hyphens (-), underscores (_), and periods (.).

operating_system=?

Type of an operating system running on a host.

The value can be any of the following:

  • Linux
  • Windows
  • Solaris
  • HP-UX
  • AIX
  • XenServer
  • Mac_OS
  • VIS6000
  • VMware_ESX
  • Windows_Server_2012
  • Oracle_VM
  • OpenVMS
NOTE:

Use Windows Server 2012 operating system only when the host needs to access the Thin LUN and use the space reclaiming function.

location=?

An updated location of a host.

The value contains 1 to 31 characters.

model=?

Model of a host.

The value contains 1 to 31 characters.

ip=?

IP address of a host.

-

network_name=?

Name of the network on which a host resides.

The value contains 1 to 31 characters.

Level

Administrator

Usage Guidelines

None.

Example

To modify the attributes of host 1, where the updated host name is "newhost002" and the updated location is "otherlocation", run the following command.

admin:/>change host host_id=1 name=newhost002 location=otherlocation 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121367

Downloads: 149

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next