No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show host general

show host general

Function

The show host general command is used to query the information on hosts.

Format

show host general [ host_id=? ]

Parameters

Parameter

Description

Value

host_id=?

ID of a host.

To obtain the value, run "show host general" without parameters.

Level

Guest

Usage Guidelines

  • To query the information on existing hosts, run show host general.
  • To query the information on a specific host, run show host general host_id=?.

Example

  • To query the information on existing hosts, run the following command.
    admin:/>show host general 
    ID Name        Health Status   Operating System IP Address      Model     Location 
    ---  ----------  --------------  ---------------- ------------- --------- ----------- 
    0 Host000     Normal          Windows            --              --        -- 
    1 Host001     Normal       Windows            --              --        -- 
    2 newhost001  Normal          Linux              --              2058      newlocation 
    3 newhost002  Normal          Linux              192.168.3.53 2458      newlocation 
    4 Host004     Normal          Windows            --              --        --
  • To query the information on host "1", run the following command.
    admin:/>show host general host_id=1 
      
    ID               : 1 
    Name             : Host001 
    Health Status : Normal 
    Operating System : Windows 
    IP Address       : -- 
    Model            : -- 
    Network Name     : 
    Location         : --

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Host ID.

Name

Host name.

Health Status

Health status of the host.

Operating System

Operating system.

IP Address

IP Address of host.

Model

Model of host.

Network Name

Network name of host.

Location

Location of host.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123638

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next