No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snapshot activate

change snapshot activate

Function

The change snapshot activate command is used to activate snapshots.

Format

change snapshot activate snapshot_id_list=?

change snapshot activate snapshot_id=? [ cdp_id=? ]

Parameters

Parameter

Description

Value

snapshot_id_list=?

ID of a snapshot.

To obtain the value, run "show snapshot general".

You can specify multiple snapshot IDs separated by commas (,), or an ID range separated by hyphens (-), such as: 0,5-8.

A maximum of 2048 snapshot IDs are allowed.

snapshot_id=?

ID of a snapshot.

To obtain the value, run "show snapshot general".

cdp_id=?

ID of a HyperCDP object.

  • The value is an integer from 0 to 1999999.
  • To obtain the value, run "show hyper_cdp general".

Level

Administrator

Usage Guidelines

  • Only the snapshots in the inactive state can be activated.
  • Multiple snapshots on different source LUNs can be activated simultaneously, but they on the same source LUN cannot be activated simultaneously.

Example

  • Activate snapshot "10".
    admin:/>change snapshot activate snapshot_id_list=10 
    WARNING: You are about to activate snapshot. 
    Suggestion: Before performing this operation, ensure that the storage pool capacity is sufficient. 
    Have you read warning message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Activate snapshot successfully.
  • Activate snapshots "7", "8", and "9" simultaneously.
    admin:/>change snapshot activate snapshot_id_list=7,8,9 
    WARNING: You are about to activate snapshot. 
    Suggestion: Before performing this operation, ensure that the storage pool capacity is sufficient. 
    Have you read warning message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Activate snapshot successfully.
  • Activate snapshot "1" for HyperCDP object "0".
    admin:/>change snapshot activate snapshot_id=1 cdp_id=0 
    WARNING: You are about to activate snapshot. 
    Suggestion: Before performing this operation, ensure that the storage pool capacity is sufficient. 
    Have you read warning message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Activate snapshot successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122560

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next