No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show bond_port

show bond_port

Function

The show bond_port command is used to query bonded ports.

Format

show bond_port [ bond_port_id=? | bond_port_name=? ]

Parameters

Parameter

Description

Value

bond_port_id=?

ID of the bonded port.

To obtain the value, run "show bond_port" without parameters.

bond_port_name=?

Name of the bonded port.

To obtain the value, run "show bond_port" without parameters.

failover_group_id=?

ID of the failover group.

The value is an integer from 1 to 1024.

Level

Guest

Usage Guidelines

  • To query all bonded ports, run "show bond_port".
  • To query a specific bond port, run "show bond_port bond_port_id=?".
  • To query a specific bond port, run "show bond_port bond_port_name=?".
  • To query bonded ports in a specified failover group, run "show bond_port failover_group_id=?".

The parameters bond_port_id, bond_port_name, and failover_group_id are mutually exclusive.

Example

Query all bonded ports.

admin:/>show bond_port 
  ID      Name     Health Status  Running Status  MTU Port ID List           IPv4 Address  Subnet Mask IPv6 Address  Prefix Length  Number Of Initiators  
  ------  -------  -------------  --------------  ----  ---------------------  ------------  -------------  ------------  -------------  -------------------- 
  139009  newbond  Normal         Link Up         1500  CTE0.A7.P2,CTE0.A7.P3  192.168.1.1 255.255.224.0  --            --              0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

ID of the bonded port.

Port ID List

ID list of bonded ports that form the bond port.

Name

Bond port name.

Health Status

Health status of the bond port.

Running Status

Running status of the bond port.

MTU

MTU of the bond port.

IPv4 Address

Indicates the IPv4 address.

Subnet Mask

Indicates the ipv4 subnet mask.

IPv6 Address

Indicates the ipv6 address.

Prefix Length

Indicates the IPv6 subnet mask.

Number Of Initiators

Number of initiators.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 115758

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next