No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create lun_consistency_group

create lun_consistency_group

Function

The create lun_consistency_group command is used to create a LUN consistency group.

Format

create lun_consistency_group name=? [ lun_id_list=? ] [ description=? ]

Parameters

Parameter

Description

Value

name=?

Name of a LUN consistency group.

The value contains 1 to 31 ASCII characters, including digits, letters, underscores (_), hyphens (-), and periods (.).

lun_id_list=?

LUN ID list. Parameter "lun_id=?" is specified.

To obtain the LUN ID list, run "show lun general". If you want to concurrently add multiple LUNs to a LUN consistency group:

  • Separate multiple LUN IDs by commas (,). For example, "lun_id_list=1,2,3,4,5".
  • Specify a LUN ID range using a hyphen (-). For example, "lun_id_list=1-5,7,9-11".

description=?

Description of a LUN consistency group.

-

Level

Administrator

Usage Guidelines

To create a LUN consistency group, perform the following:

Manually specify the parameters of a LUN consistency group.

create lun_consistency_group name=? [lun_id_list=?] [description=?]

Example

  • Create a LUN consistency group, where its parameter is as follows: Name: lun_consistency1.
    admin:/>create lun_consistency_group name=lun_consistency1 
    Create LUN consistency group successfully. 
     
  • Create a LUN consistency group, where its parameters are as follows:
    • Name: lun_consistency1.
    • LUN ID list: 1-5.
    admin:/>create lun_consistency_group name=lun_consistency1 lun_id_list=1-5 
    Create LUN consistency group successfully. 
    Add LUN 1 to LUN consistency group successfully. 
    Add LUN 2 to LUN consistency group successfully. 
    Add LUN 3 to LUN consistency group successfully. 
    Add LUN 4 to LUN consistency group successfully. 
    Add LUN 5 to LUN consistency group successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 115210

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next