No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change devicemanager ciphersuite

change devicemanager ciphersuite


The change devicemanager ciphersuite command is used to configure the OpenSSL cipher suite used by the DeviceManager service.


change devicemanager ciphersuite suite=?






OpenSSL cipher suite type (If the safe type is selected, the HTTPS key agreement algorithm uses ECDHE. The safe type is applicable to users requiring high security levels.).

The value can be:

  • safe.
  • compatible.


Super administrator

Usage Guidelines

After this operation, DeviceManager will be restarted and the session will be interrupted.


Change the cipher suite type to safe.

admin:/>change devicemanager ciphersuite suite=safe 
WARNING: You are about to change the cipher suite type of DeviceManager. 
1.If you change the cipher suite type to "safe", data transmission security will increase, but DeviceManager may be inaccessible for clients with a lower encryption level. 
2.If you change the cipher suite type to "compatible", data transmission security will decrease and user data may have security risks. 
Suggestion: After performing this operation, manually restart DeviceManager to make the operation take effect. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122098

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next