No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove host ib_initiator

remove host ib_initiator

Function

The remove host ib_initiator command is used to remove an IB initiator from a host.

Format

remove host ib_initiator host_id=? ib_initiator_wwn=?

Parameters

Parameter

Description

Value

host_id=?

Host ID.

To obtain the value, run the "show host general" command.

ib_initiator_wwn=?

IB initiator WWN.

To obtain the value, run the "show ib_initiator general" command without parameters.

Level

Administrator

Usage Guidelines

None

Example

To remove an IB initiator from host 0, run the following command:

admin:/>remove host ib_initiator host_id=0 ib_initiator_wwn=0000000000005678 
DANGER: You are about to remove initiator from host. This operation will interrupt related ongoing services. 
Suggestion: Before performing this operation, ensure that the selected host and initiators are correct and stop services on the host. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 114161

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next