No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove lun_consistency_group lun

remove lun_consistency_group lun


The remove lun_consistency_group lun command is used to remove a member LUN from a specified LUN consistency group. Use this command when consistency protection is not required for a specified LUN.


remove lun_consistency_group lun lun_consistency_group_id=? lun_id_list=? [ remove_snapshot=? ]






ID of the LUN consistency group from which a LUN is to be removed.

To obtain the value, run "show lun_consistency_group general".


ID list of LUNs to be removed from a LUN consistency group.

To obtain the LUN ID list, run "show lun_consistency_group lun". If you want to concurrently remove multiple LUNs from a LUN consistency group:

  • Separate multiple LUN IDs by commas (,). For example, "lun_id_list=1,2,3,4,5".
  • Specify a LUN ID range using a hyphen (-). For example, "lun_id_list=1-5,7,9-11".


Whether to remove the snapshot of the LUN from the snapshot consistency group.




Usage Guidelines

  • If a LUN consistency group has an ongoing HyperCDP schedule, its member LUNs cannot be removed.
  • When removing a LUN, you can determine whether to remove the LUN's snapshot from the snapshot consistency group.


Remove LUN "2" from LUN consistency group "2".

admin:/>remove lun_consistency_group lun lun_consistency_group_id=2 lun_id_list=2 
WARNING: You are about to remove the LUN  from the LUN consistency group. After the removal, the LUN has no consistency protection. This operation will cause the snapshot consistency group created for this LUN consistency group to fail to be rolled back. 
Suggestion: Before performing this operation, ensure that the LUN does not need consistency protection. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Remove LUN 0 from LUN consistency group successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121426

Downloads: 149

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next